2011 Lancer GTS Progress (RI)

thanks im goin to get the lip i found it on ebay for like 155$ with 3-5 day delivery. instead over waithing 14-20 over seas haha.

for the tail lights i bought some tint at wal-mart an just put it on an use black duct tape to hold it on but i just bought some real tint so i dont have to use tape haha. its got the sticky crap on one side so ima do it the proper way.
as for the side markers i sanded off the wording/ numbers with fine sand paper comes off quick. then like 2 coats of
nights shade. if you need more info let me know

 

http://cgi.ebay.com/ebaymotors/VHT-...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

or anywhere you can find it. this is just a quick ref. and you can see it fine haah. just not to many coats.

 

Small up date

Side license plate no drilling.


Finished:



Blue rim decal:

 

I will be buying the HL Rear lip diffuser, HL2 front lip, 3d eye lids, Roof diffuser, & Air scoop.
keep you guys posted.

 

basically i bought a washer type thing lol yea that's what i call it.
its a washer with a threaded bolt already attached to it. the washer was very thin an mad it perfect.
then i put them through the 4 holes an put a normal washer an bolt on them. to hold them in place.
then i put 3m double sided tape on the thin washer side. cleaned surfaced really well just fyi.
then stuck it to the desired location on the bumper.
took off the bolts and then masked everything off and plasti diped it so its resistant to the weather more.
then bolted it on.

before all this i had to epoxy bolts to the opposite side to i had something to screw the plate to.

ill post some pics of the stuff i used after i go to lowes again.

 

Just painted the calipers & put the decal on.

front Calipers:


Back Calipers:

 

thanks, i used the dupli caliper paint in the can not the spray. much nicer.

 

Here are few pictures near Oakland beach:

 

fo sho hahah. surprise me with something sick haha

 

i first did it with 20% or 22% tint you can guy from wal-mart. you just strech it an use duct tape to hold it down. more difficult then it sould if you want it dont right. then i took it off an put vinyl tint on so it had a sticky side and you dont need tape. look 10X's better. but its very had to do at the top left and right corners where we have that buldge out on them. i messed one up a little to i got to redo it.

other then that you could google. how to tint tail lights or something for better into.