ok so i made a strut tower brace (well half of it ) this afternoon before going to work. only took me 1 hour to make, measure and drill the holes for the bolts,only thing left to do is the firewall atachement (spelling) i will have to weld it (my uncle will be doing it) best of all is it cost me 12.49$ for 10 feet of 3/4" metal tubing at the local metal shop,ill have enough for a front, rear strut brace and a under cat set of new tie bars! pictures to come tomorow!
its a little bit thicker than the stock GTS bar around 2mm thicker,almost 5mm thincker than the protegé5 stock bar on my friend P5
