FS: Aeroforce Analogic Gauge

SOLD

Well, I recently bought this Aeroforce analogic gauge from a guy and decided not to use it. I haven't attempted to install this simply because I really have no use for it....just an impulse buy. Here are the specs from the Aeroforce site...

This gauge does not read OBD2 data, but rather only accepts standard analog inputs. Therefore it can be used in older pre-OBD2 vehicles cars as well as recent models. It can also be used in conjunction with the Interceptor scan gauge when several additional sensors are required. It has the following features:

* Four 0-5v inputs channels
* Two EGT inputs. +/- 2 deg F accuracy. Range is 0-1024 Deg C or 32-1843 deg F.
* Can log displayed data and relay on gauge.
* Has high intensity warning lights that can be set using a 1 or 2 parameter algorithm. P1, P1 or P2, P1 and P2. For example, trigger the lights when rpm exceeds 6000 rpm, or when trans temp exceeds 230 F and coolant exceeds 210 F, or when air fuel ratio is above 12.5 and throttle is above 75%.
* Integrated output for 12v realy. Allows you to use our 12v relay kit to turn something on or off. For example, turn on an electric radiator fan when coolant exceeds 180 F, or shut off nitrous when A/F ratio exceeds 13.0. This takes over one of the 0-5v inputs if used.
* Peak recall function. Allows you to view the highest value read for a displayed parameter.


The retail on this thing from Aeroforce is 249.00...but I bought it for 150.00. I have the gauge, main connector, and the mini connector with the cable attached. When I bought it I didn't get the manual, but I have printed one from the website...so you know how to set everything up. It even has the Mitsu logo on the lower face of the gauge.

Like I said, this was an impulse buy, and just decided not to install it. Price is 100.00 SHIPPED!!


If you want to see the site, go to www.aeroforcetech.com

 

no one?