/ Register

Exhaust Depot here! woot woot!

Discussion in 'New Member Check In!' started by ExhaustDepot, May 18, 2008.

Page 1 of 2
  1. ExhaustDepot

    ExhaustDepot Member

    Whats up guys. IM looking on becoming a vendor here. Just paid my dues. :)

    IM looking on making systems for the 08 lancers at the moment. We make our systems in house in our CNC mandrel bender. We can offer competitive pricing and various styles of system.


    Give me some feed back as to what you guys want!

    Flowmaster, magnaflow, dynomax etc. I can make a bolt on kit for you guys! Just let me know the sound you want.
     
    ExhaustDepot, May 18, 2008
    #1
  2. BigSteve

    BigSteve Well-Known Member

    bolt on kits are always nice.. currently i have a custom cat back and they had to CUT and WELD.. i didnt like that part but i love my exhaust.. just whatever u wanna do plz post up numbers on what kind of HP gains the produce.

    Thanks

    and welcome!!
     
    BigSteve, May 18, 2008
    #2
  3. ExhaustDepot

    ExhaustDepot Member

    I am a small shop and I dont have the means on getting to the dyno for every muffler I use. Chances are the numbers will be identical on the current systems out there using no muffler or a magnaflow muffler.

    I want to shoot for sound too so im going to experiment to see what I can come up with. Should be fun! :)


    OH yeah, how about a highflow metalic cat? :)
     
    ExhaustDepot, May 19, 2008
    #3
  4. BigSteve

    BigSteve Well-Known Member

    im not too big on "just a chome muffler" but then again thats just me.. and thats whats hard about being a business man.. u gotta come up with something everyone will like.. check out my exhaust.. everyone on here liked it.. i belive Nemo was the only one who didnt care for it.. i need to grab you a sound clip..



    this is where i got my muffler. 2.25 inch piping

    http://www.supremeperformance.com/DisplayTab.aspx?tid=1
     
    BigSteve, May 19, 2008
    #4
  5. BigSteve

    BigSteve Well-Known Member

    BigSteve, May 19, 2008
    #5
  6. BigSteve

    BigSteve Well-Known Member

    ill work on a sound clip.. i never have done one before.. ill see what I can do.. maybe a few "fly bys" and some rev action.
     
    BigSteve, May 19, 2008
    #6
  7. eKtor

    eKtor Well-Known Member

    Sweet.. welcome to the house.... i already posted in your ft.laud. post... as long as i dont have to cut my current piping (aka you can make a flange to fit the axle flange) im down :)
     
    eKtor, May 19, 2008
    #7
  8. spiderman671

    spiderman671 Guest

    Welcome to the Lancer Tuners community!
     
    spiderman671, May 19, 2008
    #8
  9. lancered

    lancered Well-Known Member

    welcome!I think a good muffler would be one the the whole can was flat black,but the tip was chrome.like a double tip that fits inside of the exhaust cutout on the bumper.yea thatd be dope.
     
    lancered, May 19, 2008
    #9
  10. ExhaustDepot

    ExhaustDepot Member

    Heck, even for my most cheapest local customers I dont use anything chrome! They rust way to quick. I like using stainless tips. I will get a hold of some china mufflers if you guys are into the whole JDM look but they tend to blow out from the inside. That volt muffler ive used before and the perforated tubing inside have come apart before. If i go with an n1 type muffler, it will be an american muffler with a nice tip on it. Here is a dynomax muffler i use on my caliber srt setup.

    Right now this is the tip im looking at going with on the lancer, same one i used on my srt4 setup, same one i used on an evo x i did:

    http://us.st11.yimg.com/us.st.yimg.com/ ... 92_3913640

    N1 type muffler ill use if you guys want except that it will be straight. Ill see what i can come up with when i have the car on the lift:

    http://srt4tech.com/exhaust/caliber/tigcsrt3.jpg




    My caliber srt4 pix so you can see some of our work:


    http://srt4tech.com/exhaust/caliber/tigcsrt1.JPG

    http://srt4tech.com/exhaust/caliber/tigcsrt2.JPG

    http://srt4tech.com/exhaust/caliber/tigcsrt4.JPG

    http://srt4tech.com/exhaust/caliber/tigcsrt5.JPG

    http://srt4tech.com/exhaust/caliber/tigcsrt6.JPG
     
    ExhaustDepot, May 19, 2008
    #10
  11. BigSteve

    BigSteve Well-Known Member

    yea the lancer is made in japan.. go for the JDM look,sound,style and u should be in the clear to make some money lol.
     
    BigSteve, May 19, 2008
    #11
  12. ExhaustDepot

    ExhaustDepot Member

    Well i think ill do a semi JDM style. A slanting muffler but with a tip that comes at an angle like the caliber setup you see.

    I want to also work on a super duper CARB highflow cat. You can see pix of the one i use on the caliber system on teh down pipe.
     
    ExhaustDepot, May 19, 2008
    #12
  13. eKtor

    eKtor Well-Known Member

    the last 5 links arent working for me
     
    eKtor, May 19, 2008
    #13
  14. ExhaustDepot

    ExhaustDepot Member

    Ok i had to put caps, .JPG vs .jpg

    check your PM please! Hit me up.

    yo!
     
    ExhaustDepot, May 19, 2008
    #14
  15. ExhaustDepot

    ExhaustDepot Member

    I have my mufflers in!

    TOmorrow (tue) i s hould have a system ready for you guys!

    Hopefully with sound clips too. :)
     
    ExhaustDepot, May 19, 2008
    #15
  16. RALLIART

    RALLIART Well-Known Member

    hey whats up, i may have missed this but if you guys could make a nice headers or catback for cali spec and non-cali spec cars, it would be greatly appreciated....
     
    RALLIART, May 19, 2008
    #16
  17. BigSteve

    BigSteve Well-Known Member

    BigSteve, May 19, 2008
    #17
  18. JDM FLOW

    JDM FLOW Well-Known Member

    Hey Hector, it's Chris, I am seeing you tomorrow at 2. Hope everything goes well.
     
    JDM FLOW, May 19, 2008
    #18
  19. ExhaustDepot

    ExhaustDepot Member

    I can make a catback system but it will be 2.5". If the stock midpipe is like the evo x then its mandrel bent which sould be fine for you guys.

    If you go serious NOS then yes a 2.5" full system is for you. Right now ill just be doing the axel back and maybe the testpipe with a highflow cat.

    Not sure how teh cali model differes.
     
    ExhaustDepot, May 19, 2008
    #19
  20. ejlancer

    ejlancer Well-Known Member

    so i have the office proto type and it sounds so good I will be putting a sound clip up later and photos. Their are still sum mods that needs to be changed but the sound is so GOOD. The tip fits perfectly with the bumper. Photos will be up later

    http://www.soflancer.com
     
    ejlancer, May 22, 2008
    #20
Page 1 of 2