Auto door lock/unlock how to Hello all, I am here offering you the solution to your need to have your lock automatically locked and unlocked!!! Today I went to the dealer asking for 2 things, disable DRL and auto lock/unlock the doors, I only got one!! My wallet is hurting as they charged $1,300.00mxp(some $100usd) to do it, and after looking in Ebay I feel raped O well here is what they did!! Parts needed: DEI 452T Door Lock Pulse/Double Pulse Generator Tape Knowledge of what wires to connect it to!! O men I feel so raped!!! How it is done!! The 452T has the following wires: Red (+) 12V constant power input Black (-) chassis ground Orange (-) activation input Violet (+) activation input Red/White (+) pulse length control (12V) Green (-) 200mA lock output Blue (-) 200mA unlock output Green/White (+) 200mA lock output Blue/White (+) 200mA unlock output The ones we need and are connected to : Red (+) 12V constant power input connected to thick red wire(see pic) Black (-) chassis ground connected to ground Violet (+) activation input connected to yellow(see pic) Green (-) 200mA lock output connected to yellow/red stripe silver spots(see pic) Blue (-) 200mA unlock output connected to grey silver spots(see pic) In the following 2 pics you can see where the RED and VIOLET wires are connected, RED to the thick RED wire and the VIOLET to the not that thick YELLOW wire The pics are looking inside the door for the fuses. In the following 2 pics you can see where the GREEN and BLUE wires are connected, in the brown connector the Yellow/Red is the first from the top on the right and the grey is the second on the same side. This pics are looking to the hood release (just a little up from the handle) In the following pic you can see a little part of the top of the hood release handle. It is so easy oooohhhhhh! it hurts!! Hope this helps more than one!! Here it is http://www.amazon.com/Install-Essential ... B0009SUEW2
