Tail lights

Discussion in '8G Lancer - Customization' started by chicagolancer, Jul 13, 2009.

  1. chicagolancer

    chicagolancer Member

    does anyone know how to change the tail lights on our 08 lancers? bought new lights, but cant seem to get it
     
  2. brian95638

    brian95638 Well-Known Member

    gota undo the clips on the trunk lid
     
  3. chicagolancer

    chicagolancer Member

    in order to do that, you have to take off the bumper?
     
  4. Texas Aggie

    Texas Aggie Well-Known Member

    no. I think there is a how to floating around here somewhere. But you need to pull back the carpeting inside the trunk behind the taillights and remove the necessary bolts and clips. Check Projectlancer.net...they have a how to section on taillight removal
     
  5. RALLIART

    RALLIART Well-Known Member

    no trunk removal is needed!!! all you have to do is go into your trunk.. undo the black plastic clips that are holding the carpeting down... Please dont brake them be careful then when you remove those clips do the same for the trunk lid... now when you pull pack the carpeting i dont remember because i was a while since i did this. there is gonna be either a 10mm bolts or screws holding the lights... all this is done from inside of the car... its simple. take your time if you are doing this first time.
     
  6. dudejman05

    dudejman05 Guest

    Wha??? Theres a how to
     
  7. Redline1

    Redline1 Well-Known Member

    the head lights you have to take off the front bumper. all you do for the rear is for the coner lights unscrew the screws you see as soon as you pop the trunk take a flat head on the black clips and just take them off then pull off the capet and the bolts are ten millimeter and just wigel and pull them out
     
  8. Redline1

    Redline1 Well-Known Member

    the head lights you have to take off the front bumper. all you do for the rear is for the coner lights unscrew the screws you see as soon as you pop the trunk take a flat head on the black clips and just take them off then pull off the capet and the bolts are ten millimeter and just wigel and pull them out