/ Register

fit the parts of the 4b10 engine to the 4b11??

Discussion in '8G Lancer - Performance' started by mpirklbauer, Aug 5, 2008.

  1. mpirklbauer

    mpirklbauer Well-Known Member

    Hi

    I´m from Austria and have an new Lancer.
    The different to the US. version is, that the 4b10 has only 1.8 liter cylinder capacity, instate of the 4b11 with 2.0 liters.

    What i want to know, do the engine parts of the US. engine fit on the European one, because i can´t find any tuning parts in Europe.

    Thank you for your help.
     
    mpirklbauer, Aug 5, 2008
    #1
  2. GTS_Rob

    GTS_Rob Well-Known Member

    you should be fine with bolt on items, post underhood pics
     
    GTS_Rob, Aug 5, 2008
    #2
  3. sunstealth

    sunstealth Well-Known Member

    id like to know if the 1.8 head would fit the 2.0L block ?

    the goal would b to enence compression and achieve a lil bit more power!
     
    sunstealth, Aug 6, 2008
    #3
  4. GTS_Rob

    GTS_Rob Well-Known Member

    yes, it will fit and change ur compression from 10.5:1 stock to 10:1. same bore. just less stroke with that motor
     
    GTS_Rob, Aug 6, 2008
    #4
  5. mpirklbauer

    mpirklbauer Well-Known Member

    so you think the pulley will fit?
    put the rrm header, because the exhaust volume of the engine is different.

    what i need is power from die low and in the middle to drive with less rpm.
     
    mpirklbauer, Aug 7, 2008
    #5
  6. GTS_Rob

    GTS_Rob Well-Known Member

    i dunno, if the pulley is different, but i bet it fits. my guess is it all fits, or can be made to fit VERY easily. but will prolly bolt up.
     
    GTS_Rob, Aug 7, 2008
    #6
  7. GTS_Rob

    GTS_Rob Well-Known Member

    i dont know about austria, but our auto part stores stateside stock k&n drop in filters. if you can get one of those, you will feel an immediate notice while waiting for ur parts to ship! that filter fits ur car all the way to EVO
     
    GTS_Rob, Aug 7, 2008
    #7
  8. GTS_Rob

    GTS_Rob Well-Known Member

    what model is your car considered? GT?
     
    GTS_Rob, Aug 7, 2008
    #8
  9. mpirklbauer

    mpirklbauer Well-Known Member

    my model is called invite.

    it´s a 1.8 L MIVEC engine with 105kW/143 Hp
    and a torque of 178 Nm.

    i think it´s considered to the ES because we only have one engine to choose.
     
    mpirklbauer, Aug 7, 2008
    #9
  10. Sarach

    Sarach New Member

    I have 4B10 too, it is very hard to find performance parts for 1.8......
     
    Sarach, May 3, 2011
    #10
  11. Sarach

    Sarach New Member

    if you have any information for performance parts please tell me
     
    Sarach, May 3, 2011
    #11
  12. stix

    stix New Member

    Hi there, i am also in the same boat as you are. I am from malaysia and our national car maker(Proton) rebadged the lancer(Inspira) in 2 trims, the 2.0cvt and the 1.8mt. Obviously the drivers choice is the 1.8mt. I bought tht in hopes of converting it to a 2.0 and have been researching. what i found out was all you need was the piston,rod,crankshaft and the ecu. Thats a start.
     
    stix, May 30, 2011
    #12